Cerere oferta

    Tastează codul: captcha

    https://topmetrology.ro/wp-content/uploads/2020/08/vicivision.pdf

      Descarcă catalogul TopMetrology

      Tastează codul din dreapta in câmpul de jos: captcha

      Optical measuring machine Vicivision 314 PRIMA 300 x 140 mm

      High resolution.

      Detailed images capture even minute features.

      Dimensional control directly on the shop floor.

      Each part produced by the CNC lathe can be measured within the production environment.

      Greater productivity also on smaller batches.

      Batch changing is fast and efficient.

      One measuring system for multiple CNC lathes.

      A single system can operate next to multiple machining centers, involving more than one operator.

       

      Keeping production in tolerance.

      Reduction in machine downtime thanks to immediate inspection without the need to leave the wokstation.
      Significant reduction in rejects, implementing the preventive actions indicated by the measurement trend graphs.

      VICIVISION Tool-loop.

      It is possible to set the interface between MTL and the workstation to automatically correct tool parameters. This function eliminates human error and speeds up tool parameter settings. Each part produced is ready to
      be delivered.

      The machine improves productivity.

      Operators are more independent during inspection and tool offsets can be adjusted before parts become out of tolerance in order to reduce the amount of rejects produced.

      Software

      The software has been developed by VICIVISION to make the complex computing power user-friendly. For this reason the interface is divided into two macro environments:

      Production environment: designed for use by various operators with diverse computer knowledge. This environment is extremely practical and intuitive with a bar chart or semaphore graphic display which gives the operator an immediate good/reject result.

      In this environment the operator can load a “piece program”, carry out all measurements with a single click, print out a report complete with graphs and check each single measurement in order to make corrections and save the data for statistical purposes. The operator carrying out the measurements in production will see the image of the piece displayed on the monitor and will have the same practical sensation as the profile projector.

      In addition, with the graphics it is possible to highlight the non-conforming measurements and the operator can immediately check the level of piece cleaning, if traces are present or other irregularities that may have conditioned the measurement.

      Programming environment: developed to express all the machine’s computing potential and provides the possibility of intuitive programming, from simple static measurements (diameters, lengths…) to more complex ones.

      Each measurement obtained can be included or excluded in the measurement report, in the statistics or on the production panel.

      Programming is carried out directly on the real image of the piece. This characteristic gives a clear view of the conditions of the item to be measured (size of the detail, quality of finishing and cleaning, fixing conditions….).

      The image of the piece is displayed vertically, as it is in the machine, with immediate orientation also of small and symmetrical pieces.

      The program environment is also available “off-line” so that programming can be done from the comfort of the office, maintaining the same programming accuracy and conditions.

       

      List of standard measures included in the MTL application:

      • Scanning measurements (for image acquisition of the piece being analyzed and for finding relevant references inside it): vertical, rotational, multi-position, piece start, piece end, piece rotation, timing (e.g. cams, keys), cycle repetition and positioning.
      • Referral measurements: line-line intersection, line-plane, line-circumference intersection, plane, known diameter position, axis, distances, minimum/maximum point.
      • 2D (Static) measurements: Diameter (Med/Min/Max); Distance (Vertical/Horizontal/Free/piece axis referred/Machine axis referred); Angle; Radius; Chamber dimensions (angle, length, height).
      • Comparison measurements and mathematical calculation: distance, off-set, difference, sine, cosine, tangent, etc.
      • Geometric measurements: straightness, perpendicularities, parallelisms, symmetries.
      • Thread measurements (average or single crest analysis): pitch; height; diameter (maximum, minimum, medium, roll); crest angle; LG/NG quote.
      • Tolerance pick-list for the main kind of threads with possibility to add more values.
      • Measurements of diameters in rotation: minimum, medium, maximum, interrupted diameter.
      • Angular position measurements: cams timing displacement, tab/key slots, loops, shoulder millings, interrupted diameters.
      • Form measurements: roundness; coaxiality; radial run-out; axial run-out; cylindricity (LSC, MIC, MCC, MZC).
      • Measurements on hexagon (or polygons with a definite number of sides): key, asymmetry, phasing.
      • ‘’Live measure” system for 2D measurements on the image acquired
      • Off-line Programming system on real image or DXF file
      • Profile comparison obtained with DXF file

      Download the brochure

      Description

      High resolution.

      Detailed images capture even minute features.

      Dimensional control directly on the shop floor.

      Each part produced by the CNC lathe can be measured within the production environment.

      Greater productivity also on smaller batches.

      Batch changing is fast and efficient.

      One measuring system for multiple CNC lathes.

      A single system can operate next to multiple machining centers, involving more than one operator.

       

      Keeping production in tolerance.

      Reduction in machine downtime thanks to immediate inspection without the need to leave the wokstation.
      Significant reduction in rejects, implementing the preventive actions indicated by the measurement trend graphs.

      VICIVISION Tool-loop.

      It is possible to set the interface between MTL and the workstation to automatically correct tool parameters. This function eliminates human error and speeds up tool parameter settings. Each part produced is ready to
      be delivered.

      The machine improves productivity.

      Operators are more independent during inspection and tool offsets can be adjusted before parts become out of tolerance in order to reduce the amount of rejects produced.

      Software

      The software has been developed by VICIVISION to make the complex computing power user-friendly. For this reason the interface is divided into two macro environments:

      Production environment: designed for use by various operators with diverse computer knowledge. This environment is extremely practical and intuitive with a bar chart or semaphore graphic display which gives the operator an immediate good/reject result.

      In this environment the operator can load a “piece program”, carry out all measurements with a single click, print out a report complete with graphs and check each single measurement in order to make corrections and save the data for statistical purposes. The operator carrying out the measurements in production will see the image of the piece displayed on the monitor and will have the same practical sensation as the profile projector.

      In addition, with the graphics it is possible to highlight the non-conforming measurements and the operator can immediately check the level of piece cleaning, if traces are present or other irregularities that may have conditioned the measurement.

      Programming environment: developed to express all the machine’s computing potential and provides the possibility of intuitive programming, from simple static measurements (diameters, lengths…) to more complex ones.

      Each measurement obtained can be included or excluded in the measurement report, in the statistics or on the production panel.

      Programming is carried out directly on the real image of the piece. This characteristic gives a clear view of the conditions of the item to be measured (size of the detail, quality of finishing and cleaning, fixing conditions….).

      The image of the piece is displayed vertically, as it is in the machine, with immediate orientation also of small and symmetrical pieces.

      The program environment is also available “off-line” so that programming can be done from the comfort of the office, maintaining the same programming accuracy and conditions.

       

      List of standard measures included in the MTL application:

      • Scanning measurements (for image acquisition of the piece being analyzed and for finding relevant references inside it): vertical, rotational, multi-position, piece start, piece end, piece rotation, timing (e.g. cams, keys), cycle repetition and positioning.
      • Referral measurements: line-line intersection, line-plane, line-circumference intersection, plane, known diameter position, axis, distances, minimum/maximum point.
      • 2D (Static) measurements: Diameter (Med/Min/Max); Distance (Vertical/Horizontal/Free/piece axis referred/Machine axis referred); Angle; Radius; Chamber dimensions (angle, length, height).
      • Comparison measurements and mathematical calculation: distance, off-set, difference, sine, cosine, tangent, etc.
      • Geometric measurements: straightness, perpendicularities, parallelisms, symmetries.
      • Thread measurements (average or single crest analysis): pitch; height; diameter (maximum, minimum, medium, roll); crest angle; LG/NG quote.
      • Tolerance pick-list for the main kind of threads with possibility to add more values.
      • Measurements of diameters in rotation: minimum, medium, maximum, interrupted diameter.
      • Angular position measurements: cams timing displacement, tab/key slots, loops, shoulder millings, interrupted diameters.
      • Form measurements: roundness; coaxiality; radial run-out; axial run-out; cylindricity (LSC, MIC, MCC, MZC).
      • Measurements on hexagon (or polygons with a definite number of sides): key, asymmetry, phasing.
      • ‘’Live measure” system for 2D measurements on the image acquired
      • Off-line Programming system on real image or DXF file
      • Profile comparison obtained with DXF file
      View more See less

      Do you have more questions?

      You can request an offer

      Optical measuring machine Vicivision 314 PRIMA 300 x 140 mm

      Request offer

      Funding

      Financing solutions for the purchase of new equipment, through BCR Leasing or Grenke.

      See Financing Methods

      Specifications

      Max. measurable piece

      300 x 140 mm

      Max. piece to be loaded

      315 x 120 mm

      Max. weight to be loaded

      30 Kg

      Measurement accuracy on diameter (average diam.)

      1,5 + D[(mm)/200)] μm

      Measurement accuracy on length

      4 + L[(mm)/200)] μm

      Applications

      One specific software tool for measuring thread elements, fittings, screws and bolts. Measuring Fittings, Turned Threads and Screws It is often difficult for manufacturers to get accurate and objective results...

      Fitting and turned threads: How to measure them in a few seconds

      View more
      When it comes to quality control of such complex parts, measuring crankshafts can be a cumbersome and time-consuming, process, possibly requiring an environmentally controlled room. VICIVISION has developed a specific...

      Measuring Crankshafts

      View more
      MTL are optical measuring machines designed to measure turned and ground pieces, like camshafts, directly in the shop-floor because, these machines, are equipped with double temperature compensation system on diameters...

      Optical Measuring Machines for a quick camshafts inspection

      View more
      The series of Vicivision optical measuring machines allows to detect every detail of turbines with or without a stem. The design with direct access to the piece ensures maximum ease...

      Optical measuring machines for the rapid control of each type of turbine

      View more
      Pick and place system for the dimensional control for automotive valves with a rate of 600 valves/hour. The machine allows the valves metrological inspection by means of a vision system...

      The quality control solutions for automotive valves

      View more
      Vicivision is the optical measuring machine specific for components of micro mechanical systems: for the dental sector, the biomedical and watches, screws for eyeglasses and other elements extremely minutes because...

      The simplest and accurate system for measuring small details such as screws dental, biomedical and of micro mechanical.

      View more

      Guarantee

      Warranty 12 or 24 months

      See Service

      See Product Catalog

      You can find all our products that you can always rely on!

      Open the Catalog