Centre de prelucrat vertical 5 axe - AXILE G8
The G8 design is based on an advanced gantry construction giving the most powerful structure to achieve the best working conditions when machining the most complex work pieces.
The powerful 5 axes simultaneous machining is provided by high dynamics from tool motion (3 axes) and working piece motion (2 axes). Both rotary axes in the table are driven by built-in motors with high torque!
Specification:
| ITEM | UNIT | G8 |
| Rotary & tilting table | ||
| Rotary table top diameter | mm | 800 |
| Tilting axis A | mm | ±120 |
| Rotary axis C | mm | 360 |
| Max. table load | kg | 1300 |
| T-slot (w/pitch/no) | mm | 14 x 80 x 5 |
| Travel | ||
| X axis | mm | 670 |
| Y axis | mm | 820 |
| Z axis | mm | 600 |
| Spindle | ||
| Spindle taper | mm | HSK A63 |
| Transmission | Built-in | |
| Spindle speed | rpm | 15000;20000 |
| Motor output | kW | 30/46;25/40 |
| Axes feed rate | ||
| X axis | m/min | 60 |
| Y axis | m/min | 60 |
| Z axis | m/min | 60 |
| ATC | ||
| Capactity | 48/96/120 | |
| Max. tool length | mm | 300 |
| Max. tool diameter | mm | Ø75 |
| Max. tool weight | mm | 8 |
| Accuracy ( x/y/z axes) | ||
| Positioning accuracy | mm | 0.008 |
| Repeatability |
mm |
0.005 |
|
Dimention |
||
| Weight | kg | 18,000 |
Standard accessories:
| Spindle with CTS |
| Built-in spindle (14,000rpm – grease lubrication bearing ) |
| Chip conveyor |
| Coolant through spindle with high pressure pump 20 bar (with paper filter) |
| Water cooling system |
| Chip flushing gun |
| Air conditioner |
| Oil skimmer |
| Linear scales on three axes |
Optional accessories:
| CTS coolant tank with high pressure pump 70 bar |
| Automatic spin window |
| Workpiece touch probe |
| Tool setter |
| Automatic tool changer control panel |
| Oil mist collector and recycling equipment |
