Cerere oferta

    Tastează codul: captcha

      Descarcă catalogul TopMetrology

      Tastează codul din dreapta in câmpul de jos: captcha

      Horizontal Machining Center Makino a81nx HMC

      Makino’s a81nx horizontal machining center (HMC) features the largest pallet available in the popular 1-Series line. It provides unparalleled productivity and reliability, and helps customers reduce costs from their manufacturing operations.

      The Makino a81 is loaded with features that help manufacturers increase productivity and decrease operational costs, including swift axis movement and faster spindle acceleration/deceleration than other comparable HMCs. Out-of-cut time is diminished because of the machine’s standard ring-type, 40-tool magazine with short seek times. This is complemented by a quick automatic tool changer that has a fast tool-to-tool (1.7 seconds) time and chip-to-chip (3.5 seconds) time.

      Makino’s a81 is the largest of the 1-Series line. It is capable of handling a payload of 2,640 pounds (1,200 kg) and an X-, Y-, Z-axis travel of 35.4 x 31.5 x 40.2 inches (900 x 800 x 1020 mm). The a81 is capable of simultaneous B-axis movement with tool change

      It is fitted with a 24.8-inch (630-mm) pallet and a standard 50 taper, 10,000-rpm spindle with exceptional acceleration characteristics and minimal vibration. The spindle is equipped with a 300-psi through-spindle coolant system. Rapid traverse and cutting feedrate of the a81 are 1,968 ipm (50 m/min).

      The a81’s footprint is 138 x 215 inches (3,460 x 5,370 mm), which is more compact than competitive machines and designed for easy maintenance access around the entire perimeter. High-volume chip evacuation is facilitated by a wide-center trough with a standard rear discharge lift up chip conveyor that includes a coolant leakage protection design.

      Other features include an automatic pallet changer with safety guard, a standard three-point support system, an ergonomic swing operator control panel, a safety-designed four-layer protective operator door window and flood coolant and overhead shower coolant.

      The a81 comes standard with Makino’s proprietary, next generation Geometric Intelligence (GI) servo control with Radical Mode. GI helps provide the lowest cycle times achievable, while maintaining accuracy and meeting the customer’s Cpk requirements.

      Description

      Makino’s a81nx horizontal machining center (HMC) features the largest pallet available in the popular 1-Series line. It provides unparalleled productivity and reliability, and helps customers reduce costs from their manufacturing operations.

      The Makino a81 is loaded with features that help manufacturers increase productivity and decrease operational costs, including swift axis movement and faster spindle acceleration/deceleration than other comparable HMCs. Out-of-cut time is diminished because of the machine’s standard ring-type, 40-tool magazine with short seek times. This is complemented by a quick automatic tool changer that has a fast tool-to-tool (1.7 seconds) time and chip-to-chip (3.5 seconds) time.

      Makino’s a81 is the largest of the 1-Series line. It is capable of handling a payload of 2,640 pounds (1,200 kg) and an X-, Y-, Z-axis travel of 35.4 x 31.5 x 40.2 inches (900 x 800 x 1020 mm). The a81 is capable of simultaneous B-axis movement with tool change

      It is fitted with a 24.8-inch (630-mm) pallet and a standard 50 taper, 10,000-rpm spindle with exceptional acceleration characteristics and minimal vibration. The spindle is equipped with a 300-psi through-spindle coolant system. Rapid traverse and cutting feedrate of the a81 are 1,968 ipm (50 m/min).

      The a81’s footprint is 138 x 215 inches (3,460 x 5,370 mm), which is more compact than competitive machines and designed for easy maintenance access around the entire perimeter. High-volume chip evacuation is facilitated by a wide-center trough with a standard rear discharge lift up chip conveyor that includes a coolant leakage protection design.

      Other features include an automatic pallet changer with safety guard, a standard three-point support system, an ergonomic swing operator control panel, a safety-designed four-layer protective operator door window and flood coolant and overhead shower coolant.

      The a81 comes standard with Makino’s proprietary, next generation Geometric Intelligence (GI) servo control with Radical Mode. GI helps provide the lowest cycle times achievable, while maintaining accuracy and meeting the customer’s Cpk requirements.

      View more See less

      Do you have more questions?

      You can request an offer

      Horizontal Machining Center Makino a81nx HMC

      Request offer

      Funding

      Financing solutions for the purchase of new equipment, through BCR Leasing or Grenke.

      See Financing Methods

      Specifications

      Table size

      630×630 mm

      Axis Travels

      900x900x1020 mm

      Spindle

      10000 rpm

      Applications

      AEROSPACE

      View more

      AUTOMOTIVE

      View more

      See Product Catalog

      You can find all our products that you can always rely on!

      Open the Catalog